Martindale Electric introduces ET6300 tester

Martindale Electric, a provider of electrical testing and safety equipment, has announced the launch of the ET6300 Series Multifunction Installation Tester. Designed to meet the needs of electricians now and into the future, Martdinale describes the ET6300 as "accurate, reliable and user-friendly". It has a high level of input protection with a CAT IV safety rating, ensuring that users are protected when working in challenging environments. The high-quality, full-colour TFT display provides clear, easy-to-read results and connection information. The tester has an intuitive interface, together with multiple help screens that guide users through the testing process, displaying easy-to-read test connection diagrams that simplify even the most complex tests. The ET6300 not only provides testing to the 18th Edition Wiring Regulations, but it is also EV-ready, making it ideal for electricians who may need to test electric vehicle (EV) charger points in the future. It comes with enhanced test capability such as low-current continuity tests and multiple RCD test options and is supplied with the TL180 slimline test probe and a mains charger with rechargeable batteries. To enable EV testing capability, the ET6300 can be upgraded at any time with the Martindale TL305EV adapter which allows connection to an EVSE charging point (Type-2 connector), giving the ability to support all relevant measurements via the standard measurement inputs. The Martindale ET6300 combines precision, safety and future-ready features like EV testing capability making it the ideal choice for electricians tackling today’s and tomorrow’s challenges. For more from Martindale Electric, click here.  

ICEL Conference to guide the future of emergency lighting

The ICEL Emergency Lighting Conference 2025 is set to return to Cavendish Conference Centre, London on Thursday, 11 September 2025, bringing together leading experts and key stakeholders to drive progress in emergency lighting safety and compliance, where attendees will have the opportunity to engage with manufacturers, industry leaders, and key decision-makers. The event will explore the latest industry advancements, regulatory updates, and best practices to reinforce building safety and create more secure environments for people to live, work, and learn in. For the third consecutive year, Joanna Watchman, CEO of B Corp-certified agency Content Coms and Founder of Work in Mind, will facilitate the conference. Her expertise in ESG and sustainability communications has been highly praised by attendees in 2023 and 2024, ensuring another engaging and insightful event. The conference agenda is tailored to a diverse audience, including designers, specifiers, distributors, installers, maintainers, and end-users. Key themes will include: • Part 1 - Competency in Emergency Lighting: Where are we now? • Part 2 - Regulatory and Standards Updates: Discussions on BS 5266 and BS 8887-221, their implications, and their impact on lighting design. • Part 3 - Installation & Maintenance Best Practices: Expert insights on contractors and maintainers in emergency lighting. • Part 4 - Sustainability in Emergency Lighting: A dedicated session on EPD/LCA/DPP for batteries and energy-efficient solutions. The event will feature a keynote speaker slot, panel discussions, with a attendance from high-profile organisations such as Laing O’Rourke, MITIE, CBRE, NHS, E.ON, EDF, WSP, Transport for London, BDP, and Sainsbury’s, many of whom attended the 2023 and 2024 conferences. Additionally, members from leading industry bodies, including ACE, BAFE, BCA, BCO, ECA, EDA, FIA, IWFM, REF, RICS, and SLL, are invited to attend and contribute to discussions shaping the future of emergency lighting. Attending the ICEL Emergency Lighting Conference 2025 offers a unique opportunity to stay ahead of the latest regulatory changes and compliance requirements. Delegates will gain valuable insights from industry-leading experts on enhancing emergency lighting design and maintenance while participating in thought-provoking panel discussions on competency schemes and sustainability. The event also provides a platform to connect with professionals and organisations at the forefront of innovation, fostering collaboration and knowledge-sharing to drive the future of emergency lighting. The ICEL Emergency Lighting Conference 2025 is the ultimate platform for knowledge sharing, networking, and staying ahead in an evolving industry. To register, please complete the registration form by clicking here. For more from The LIA, click here.  

Sangamo launches new motorised zone valves

Sangamo, a provider of innovative heating control solutions, has announced the launch of its new, high-quality motorised zone valves. Designed with both the installer and end-user in mind, these motorised valves offer precise control over the flow of hot water in heating control systems, providing a reliable solution for both residential and commercial applications. The new motorised zone valves feature a robust brass body and a steel actuator head to ensure longevity and reliable performance, even under challenging conditions. For added convenience, they are equipped with a manual lever that allows quick filling and draining of the system, making servicing straightforward and reducing maintenance demands. They are also widely compatible with existing zone valve systems, making them an ideal replacement option and come offered in two sizes: 2 Port 22mm and 3 Port 22mm. The Sangamo range of specialist time switches and heating controls is distributed through Scolmore Group company, ESP. For more from Scolmore, click here.

Push beyond your limits this National Careers Week

National Careers Week is an opportunity to support young people in positive career choices for their future in the electrical industry. The theme of this year’s National Careers Week, which runs from 3-8 March is ‘You Can’. When leaving education, it can be difficult to know what route is best to take to reach your full potential and work toward a career. NAPIT wants to highlight that becoming an electrician can lead to many different career options and opportunities. Andrew Duffen first stepped into the electrical industry straight from school as an apprentice and he is now a Technical Commercial Engineer at NAPIT. “Don’t underestimate your limits,” he says. “When I was in school, I wasn’t very academic, and I now work in a very technical world, I’ve done all my electrical qualifications, in fact there’s one qualification left as part of my own CPD.” Andrew’s journey “I did my apprenticeship at a company in Birmingham, became a qualified electrician and worked my way through the company to become an approved electrician. I used to do a lot of the inspection and testing for the company. “There was a broad range of work - new-build houses, commercial new builds, student accommodation, luxury flats, factories, hospitals. We also got into solar farms, I was lucky enough to work on large solar farms, when the Feed In Tariff came in.” After 19 years that job came to an end in 2017 when the business folded. Andrew remained on the tools for a short time but wanted to take on new opportunities. He continues, “By that stage I was in my 30s, I had been doing on-site work since I was 16. “I fancied a change, I worked with a lot of apprentices during my time at the company, helping and training them and my wife said to me why don’t you get into training?” He started looking for something new and landed a role as an electrical tutor at a local college. Andrew was advised to go to college and get a teaching qualification, which he describes as one of the hardest things he has ever done in his career. “You need to understand how to teach and the theories behind it. I got the role and when you work at a further education provider at college, within two years of starting the role you have to get a teaching qualification. “That was one of the hardest things I’ve ever done. It was scary and daunting and I had to do it during COVID-19 when teaching was online and you didn’t have that classroom support.” After four years as a tutor, an opportunity came at NAPIT, which saw Andrew join the Technical Team in summer 2024. Advice for aspiring electricians With the skills gap high on the agenda and the government’s push on renewables, the next generation of electricians and installers should explore the growth opportunities provided by the transition to net zero. Andrew has given some top tips for young people looking to start an apprenticeship. He emphasised how competitive the market is for an apprenticeship and shared how young people can stand out. He says, “I am a big apprenticeship fan - you earn and you learn, you’re learning on site, and you understand how electricity is generated and how it is transferred through the network systems, you understand that process. “You’re working in the industry and you go to college so you get learn the theory as well what you learn on site. “In the electrical world, you can’t know enough, there’s always going to be changes and you’ve got to be constantly evolving. The best bit of advice I was given was if you stand still, you get left behind.” Top tips to getting your electrical apprenticeship Go to your local college and enroll on an electrical course. Get a part time job to develop your employability skills. Make sure your CV is up to date. Set up a social media page separate to your personal one so you can showcase the work you do at college. A lot of electricians now use social media for advertising and it’s a good way to network. Offer work experience by reaching out to qualified electricians who are competent and certified.

SkillELECTRIC 2025: Search for top electrical student underway

The registration window for SkillELECTRIC 2025 is now open and those interested should register by 28 March 2025. NICEIC is again supporting SkillELECTRIC, the premier skills competition for the UK’s electrical industry. The event is part of the WorldSkills UK competition network and is designed to promote and showcase technical excellence and upcoming talent in the electrotechnical industry. SkillELECTRIC gives apprentices and students a platform to develop their skills and demonstrate what they have learnt while gaining valuable experience in a competitive environment. The 2024 SkillELECTRIC finals were the biggest to date, with Charlie Moore, from Norfolk-based NICEIC-certified business, Bramham Electrical, taking top spot. The judges noted Charlie’s grasp of key competencies including technical knowledge, attention to detail and precision. NICEIC Head of Product Development, Alex Robinson, comments, "At NICEIC, we're proud to be closely involved with SkillELECTRIC - the competition encapsulates what we stand for in terms of a commitment to learning and development as well as technical excellence. Every year, I am hugely encouraged by the depth of talent coming through in the industry and I’m looking forward to seeing that again from this year’s entrants. To those that may be interested, I’d emphasise what a fantastic opportunity this is and would encourage anyone who is eligible to take the plunge and apply today." This year, the SkillELECTRIC ‘entry stage’ is an app-based, interactive online task testing candidates’ electrotechnical knowledge. Those who register must complete the task independently. Top scorers will then progress to the National Qualifier heats, a series of one-day competitions taking place at various venues across the UK. Visit skillelectric.org.uk/registration to learn more and sign up.

Beyond storage heaters: The next generation of heating solution

Upgrading from outdated storage heaters to modern electric radiators presents an opportunity for electrical installers to enhance efficiency, safety and control in residential and commercial properties. While storage heaters were once popular due to Economy 7 tariffs, they now lag in performance and convenience. The Rointe D Series Electric Radiator offers a smarter, high-performance heating solution that is easy to install and efficient. Why replace outdated storage heaters? Improved temperature control: Storage heaters release heat unpredictably, often overheating in the morning and underperforming by evening. The Rointe D Series provides precise, demand-based heating with an integrated high-sensitivity thermostat for optimal temperature stability. Simplified, smart control: Unlike manual storage heaters requiring daily adjustments, the D Series features Wi-Fi connectivity. Through the Rointe Connect app, users can manage their heating remotely, reducing unnecessary energy use and enhancing client satisfaction. Compliance with modern safety standards: Many older storage heaters contain asbestos, posing health risks. Replacing them with the asbestos-free D Series ensures compliance with modern safety standards. Lower running costs and energy efficiency: With Fuzzy Logic Energy Control, the D Series reduces energy consumption by up to 62%, outperforming traditional storage heaters and ensuring long-term cost savings for clients. Healthier air quality: Storage heaters incorporate a fan that forces air circulation. If not cleaned regularly, this system can accumulate and distribute dust throughout the home, which may trigger asthma and other respiratory conditions. The D Series operates without forced air movement, maintaining a cleaner and healthier indoor environment. Heavy and difficult installation: Storage heaters are large and cumbersome, with heavy internal bricks that must be transported separately. Their weight and complexity make installation physically demanding for electricians. In contrast, the D Series is lightweight and easy to install, saving time and effort for professionals. The Rointe D Series – a smart choice for installers Electrical installers benefit from recommending and installing the D Series for its ease of installation and cutting-edge features: Seamless Wi-Fi integration: The built-in Wi-Fi Direct module enables direct control without additional gateways, streamlining setup and ensuring client convenience. Exceptional energy efficiency: The D Series consumes only the energy necessary to maintain a stable temperature, reducing overall power usage and maximising cost savings for end users. Its Fuzzy Logic Energy Control and Adaptive Start technology ensure optimal performance with minimal waste. Quick installation: Unlike storage heaters that require dedicated Economy 7 circuits, the D Series works with a standard electrical connection, simplifying installation. Enhanced heat distribution: Thermal Fluid Tech ensures even heat distribution, preventing hot and cold spots. Wide internal fins maximise dissipation, making it a superior alternative to conventional storage heating. Durable, recycled materials: Made from 100% recycled aluminium, the D Series is a sustainable, high-quality heating solution designed for longevity. Sleek, premium design: Crafted entirely from aluminium with no plastic components, the D Series provides a stylish and durable finish. AI-driven energy optimisation: The Advanced Artificial Intelligence Heating System learns usage patterns to enhance efficiency and automatically optimise heating schedules. Upgrade clients to smarter, more efficient heating Recommending and installing the Rointe D Series allows electrical professionals to provide clients with cutting-edge heating that prioritises efficiency, ease of use and smart connectivity. As demand for low-consumption electric heating grows, transitioning from outdated storage heaters to intelligent radiators benefits both installers and users. Explore the full Rointe D Series range at rointe.co.uk and stay ahead in the electric heating industry.

MCS reaches milestone with record number of certified contractors

MCS (Microgeneration Certification Scheme), the UK’s quality mark for renewable energy technologies, has reached a new milestone, with over 5,250 contractors certified under the Scheme, the highest since it began in 2008. This milestone comes after a record-breaking year for certified renewable installations in 2024, showing both the growing demand for renewable energy technologies and the increasing consumer confidence in MCS certified contractors to deliver these installations. Following the closure of the Feed-in Tariff (FiT), MCS contractor numbers dropped from nearly 5,000 in 2012 to just 1,700 in 2019. Since then, MCS has rebuilt its contractor base, certifying around 700 new businesses each year. According to the MCS Data Dashboard, 1,443 installers gained certification in 2024 across a range of renewable technologies. Solar PV saw the biggest rise, with 718 contractors gaining certification for solar PV in 2024, bringing the total number to over 4,000. The number of MCS certified heat pump contractors also continues to grow, with 387 becoming certified in 2024, bringing the total to over 2,000. This rise reflects the increasing demand for low carbon heating, as heat pump installations hit a record 60,000 last year – a 43% jump from 2023. Battery storage also saw a growing number of contractors, with 332 contractors gaining certification in 2024, taking the total to over 2,000. The demand for battery storage is accelerating, with MCS data showing January 2025 was a record month, exceeding 2,600 installations for the technology – a 176% increase compared to January 2024. As the numbers outline, contractors are increasingly becoming certified across multiple technologies, to enable them to provide customers with multi-technology solutions to industry-recognised standards. There was also renewed momentum in the small wind sector, with three contractors gaining certification in 2024. Ryse Energy’s G-11 wind turbine also became the first MCS certified wind product on the Scheme in three years, potentially paving the way for further growth in the UK’s small wind sector. Ian Rippin, CEO of MCS, says, "The year-on-year growth in MCS certified contractors reflects the continued expansion of the UK’s small-scale renewables sector and the increasing confidence in MCS certification. With over 5,250 contractors now certified and more contractors than ever active within a single year, we are ensuring that households across the UK have access to high-quality renewable energy installations.” Craig Haycock, founder of MCS certified contractor Craig Michael Renewables, adds, "We became certified for both solar PV and battery storage knowing that MCS certification, as a mark of quality, would give our customers confidence in our installations and strengthen our business’ reputation." To further support industry growth, MCS is transitioning to the Redeveloped Installer Scheme over the next 18 months, making certification more accessible and helping more installers meet industry standards.

Behind Every Connection: WISKA UK debuts short film

WISKA UK has released Behind Every Connection, a short film that pays tribute to the craftsmanship and dedication of electricians. The film highlights the professionals behind every connection - those who bring power, safety and reliability to homes, businesses and communities.  At the centre of the story is Cornish electrician Isaac Penfold, whose journey reflects the passion, pride and responsibility that define his profession. Through his experiences, the film explores the connection between his work and his family, illustrating the personal and professional dedication that drives electricians every day.  WISKA UK shares these values, designing and manufacturing products with electricians in mind. With a focus on reliability, innovation and ease of use, the company aims to support electricians, designers and engineers in their work. Behind Every Connection serves as both a tribute to their dedication and a reaffirmation of WISKA’s commitment to working alongside them.  https://www.youtube.com/watch?v=wgt4L_pqXl8 Elliott Rothon, Marketing Manager at WISKA UK, explains the vision behind the film, “The goal was to create something different - something that doesn’t just promote our products but instead places the electrician at the centre. Behind Every Connection is a story, one that a lot of people that use our products can hopefully relate too.”  WISKA UK invites viewers to experience Isaac’s story and celebrate the electricians who keep the world connected.  WISKA manufactures and supplies an innovative and quality range of cable entry systems, junction boxes and gel jointing products. WISKA was founded in Hamburg in 1919, and has been trading in the UK since 2000. The company operates its own research and development facilities and production plants in Germany, ensuring all products meet the highest standards in excellence, and prides itself on offering quality solutions with friendly helpful service.  For more from WISKA, click here.

HIKMICRO launches indoor water leak detector

HIKMICRO, a global provider of thermal imaging products, has introduced the AD21P, an indoor leak detector that uses sound analysis and powerful imaging to track down water leaks quickly and accurately. Combining SuperDetect technology with user-friendly operation, the AD21P reportedly provides a faster, smarter, more accurate and more accessible approach to pinpointing leaks, meeting the needs of both industry professionals and first-time users. Water leaks are a persistent issue in homes and larger residential, commercial and public sector buildings, often leading to extensive damage and costly repairs. While some leaks are easy to spot - such as dripping taps or visible water stains - many remain hidden for months or even years, wasting water and driving up utility bills. Traditional detection methods rely heavily on user experience and can be inefficient, particularly in noisy environments or when dealing with small leaks. The AD21P changes that by integrating intelligent sound frequency analysis with a precise and intuitive detection system, making leak identification simpler and more efficient than ever. At the heart of the AD21P is SuperDetect, HIKMICRO’s proprietary algorithm that automatically identifies leaks by analysing sound frequency, intensity, and spatial characteristics. Traditional acoustic leak detectors require trained professionals to interpret audio feedback and distinguish between normal pipe noises and potential leaks. However, with SuperDetect, even first-time users can achieve professional-level accuracy. Shadow Zhang, Global Brand Marketing Manager at HIKMICRO, says, “Efficiency and precision have always been key concerns when detecting water leaks. But even with professional tools, inspectors need experience to determine leaks quickly and accurately. With SuperDetect, we’re making it possible for anyone - from industry professionals to homeowners - to locate leaks efficiently and with confidence.” The SuperDetect system eliminates the need for prolonged data collection or reliance on headphones to listen for sounds, instead providing clear visual cues on a digital display. This automation speeds up the leak detection process and reduces the chances of misdiagnosis caused by background noise or interference from multiple sources. Traditional pipeline leak detection methods rely on comparing flow and pressure data, but these can be unreliable in noisy environments or when dealing with small leaks. By combining acoustic detection with intelligent analysis, the AD21P offers a more efficient, reliable, and non-destructive solution. Recognising that different users have different needs, the AD21P offers two distinct detection modes: - Quick Inspection Mode: This mode is for professional users who already know which area is leaking and can directly use this mode to locate the exact leaking point. - Route Inspection Mode: This mode, designed for beginners, helps the user once they have conducted inspections to determine which area is leaking. After reaching a conclusion, they can use the quick inspection mode to locate the leaking point. The AD21P also integrates seamlessly with HIKMICRO’s leading thermal imaging technology, such as the B20S handheld thermal camera, to provide a complete leak detection solution. Thermal imaging can help users visualise temperature differences caused by water leaks, making it easier to locate issues behind walls or under floors. HIKMICRO believes that together, these technologies provide an unmatched level of accuracy and efficiency in leak detection. By reducing misdiagnoses, cutting down on unnecessary repairs, and providing rapid leak identification, the AD21P is set to redefine industry standards for leak detection technology. For more from HIKMICRO, click here.

Scolmore announces new external sales structure

Scolmore Group, a leading player in the professional electrical contracting sector, has announced a realignment of its external sales structure to support the organisation’s strategic business plan and to maximise the growth potential for all companies within the group – Click, Ovia, ESP and Unicrimp. Due to the continuing success and growth of the Elucian range since it was launched in 2021, a decision was made to separate Wiring Accessories and Circuit Protection into two separate categories, each with its own dedicated sales team. This will provide more focused effort and allow the company to develop the expertise within each sector to offer the highest level of service to customers. Scolmore Group is confident that this evolution will not only bring significant benefits to both customers and partners but will maximise the particular skills and expertise within the senior management team. The restructure will see former Regional Sales Manager (South West and Midlands), Audra Fellows, promoted to the new position of National Sales Manager - Group Specification and Key Accounts. Audra will now have responsibility for the specification and key accounts team across the UK (excluding Scotland & Northern Ireland). Audra has a wealth of experience within the industry, in particular the specification sector, and has held various roles across the business during her 15 years with the Scolmore Group. Promoted from Regional Sales Manager (North) to National Sales Manager - CLICK, is Dom Freer who will now have responsibility for the CLICK range of products across the UK (excluding Scotland and Northern Ireland). Dom has been with the business for eight years, having previously also held ASM roles with both Unicrimp and Scolmore. He will be working closely with the regional sales managers to continue to provide the exceptional service levels that customers have come to expect. With the Elucian consumer units and circuit protection range now operating as a separate product category, Scolmore Group has invested in a dedicated focus for the category with the appointment of Dan Ellams as the Elucian National Sales Manager, covering the whole of the UK (excluding Scotland and Northern Ireland). Dan joined the business in October 2024 and has significant knowledge and experience in this sector. He has overseen the launch of the new Elucian Three Phase product range introduced on 12 February 2025. For more from Scolmore, click here.