TheisCraft has announced the launch of its Multiload Spectrum range. This end-to-end solution is two years in the making and offers an entirely new take on DALI: a flexible range of products that, when used together, create a system that requires no commissioning whilst still providing all the benefits of DALI control.
Jon Theis, director of TheisCraft, says: “Although DALI is far superior to other lighting control standards, not all loads, light fittings or non-dimmable devices are DALI compatible. DALI installations are also typically more expensive than other light dimming protocols due to commissioning costs, which can account for up to a quarter of an initial project price using a standard DALI solution. Plus, any changes to a fully installed addressable DALI system will incur additional site visits and commissioning costs”.
He continues: “TheisCraft has identified the need to address the limitations of DALI with a simple, non-commissionable option for commercial applications — including the residential market — that do not need complex levels of control and expensive technical support”.
Made in Britain, the Multiload Spectrum range negates the need for specialist commissioning software and tools or third parties to be involved with the configuration and setup of the control devices.
Jon adds: “This flexible solution disproves the myth that DALI requires expensive and complicated setup costs. The Multiload Spectrum suite of products is an industry-changing development in accessible lighting control technology and will garner significant time and cost savings within commercial settings, such as hotels and office buildings”.
The new Multiload Spectrum range comprises six core products, available as a suite or individual components: DALI Power Supply Unit, DALI Switch Interface, DALI Relay, DALI ColourDIM Rotary Dimmer, DALI Phase Dimmer and DALI Passive Infrared Detector (PIR).
A DALI Power Supply Unit (PSU) supplies DC voltage for DALI control devices. The DALI Switch Interface module then allows for two switch gangs of control when used in ‘Group’ mode and is also available as an emergency test device.
TheisCraft’s DALI Relay is a single channel relay unit designed to allow control of non-DALI and non-dimmable loads such as water valves, bathroom extractor fans, window blinds or variable air volume units. The DALI Rotary Dimmer and DALI Phase Dimmer provide dimming control for non-DALI lamp loads and most DALI lighting control manufacturers’ systems. The DALI PIR is uniquely available with a choice of varying lens sizes for different ranges. Using the Handset, the PIR can be configured for on/off control, brightness, colour temperature and scene recall of up to five scenes.
These products can be used as standalone devices and work seamlessly with other manufacturers’ equipment to create a complete DALI system. Multiload Spectrum also allows the installer to set each device’s DALI groups and individual aspects via a rotary group dial and broadcast or group switch.