2 November 2026
Product of the Month: Amari Floodlight range by Aurora Lighting
 
20 November 2026
Ovia: Delivering performance and flexibility across every sector
 
20 November 2026
Exclusive: how to prepare a building for future technology
 
20 November 2026
Smart Energy Training adds electrical apprentices to portfolio
 
19 November 2026
UK Power Networks awards £4m energy flexibility contracts
 

Latest News


SELECT calls for greater regulation of the electrical industry
The head of Scotland’s largest construction trade association, SELECT, has insisted that politicians must not “repeat the mistakes of the past” by ignoring the need for regulation of the electrical industry. Managing Director, Alan Wilson, says that a new timeline released by the association to mark its 125th anniversary showed that the UK-wide sector had been calling for protection of title as far back as during the First World War. Yet despite repeated pleas for regulation, successive governments have refused to act for more than a century, SELECT says – and Alan says that continuing to turn a deaf ear would be “another black mark in history”. Alan takes up the story: “Our new timelines shows that the association asked the UK Government in 1917 and 1939 to introduce registration of electrical businesses to ensure quality and the highest safety standards. On both occasions the request was declined, and so it has continued. “It is bewildering to me that the issue of rogue operators was raised by our founders more than 100 years ago, but despite numerous pleas ever since, nothing has been done. “Are there no unqualified tradespeople out there any more? No dangerous installations putting the people of Scotland at risk? I think we all know the answers to that. “Our ancestors clearly had the wisdom to know that electrical miscreants were a danger to the industry and the wider public. It’s just a shame that generations of politicians haven’t shared that sentiment or had the foresight to tackle a problem that’s only grown worse with the rise of renewable technology and untrained ‘six-week wonders’ cashing in on the unwary public.” Backed by MSP, MPs and fellow industry bodies, SELECT has been spearheading a long-running campaign for regulation of the electrical industry, but still no action has been taken. Writing in the most recent issue of the association’s magazine, cabletalk, Alan noted, “I’m not sure whether to be surprised or depressed that this problems still exists, or to just put it down to human nature and an unwillingness to change if no one forces us to. “Now, more than ever, it’s vital that we continue the crusade started by our founders and keep fighting for regulation and protection of title for the profession of electrician. “Surely we – and by we, I include politicians – must learn our lesson and not repeat the mistakes of those who have previously rebuffed the genuine case for regulation. To do so would mean another black mark in history.” SELECT’s campaign, in partnership with the Scottish Joint Industry Board (SJIB), Scottish Electrical Charitable Training Trust (SECTT) and Unite the Union, aims to make it a statutory offence for someone to call themselves an electrician when they have no, or inadequate, qualifications. The Scottish Government had previously set up an Electricians Working Group to explore the challenges and two consultations on regulation have also taken place, while the SELECT Wall of Support continues to attract new backing. SELECT President, Mike Stark, adds, “Our campaign has now attracted a massive groundswell of support, but the urgent need to protect the public from the activities of unscrupulous traders is becoming ever clearer. “Electrotechnical work is extremely complex and it is of primary importance that the professionals who carry it out are fully trained, fully qualified and up to speed with the most recent developments and regulations in the sector.” For more from SELECT, click here.

Jefferson Tools introduces ‘Tool Up’ campaign
Jefferson Tools, a supplier of professional tools and equipment in the UK and Ireland, has launched its new 'Tool Up' campaign. Running from February to 30 April 2025, this initiative is designed to offer value via a wide array of seasonal offers designed for professionals in construction, agriculture, electrical work, and the automotive industry. Tool Up provides tradespeople with an opportunity to stock up on the equipment they rely on most during the early months of the year. Jefferson Tools has carefully selected products that cater to the specific needs of various industries. “Our mission is to ensure that customers stay efficient and well-equipped for the challenges of winter and spring projects,” says Darren Binns, National Sales Manager at Jefferson Tools. “From V-pump compressors, ideal for maintaining machinery in agricultural settings, to socket sets that offer essential versatility for mechanics, engineers, and tradespeople - every product has been chosen with the professional in mind.” For those in automotive and workshop environments, the campaign highlights the Nemesis range and the iR75 Jefferson Tools Infrared Heater, offering reliable solutions for professional use. Also as a part of the campaign, Jefferson Tools is inviting tradespeople to participate in an exclusive competition with premium prizes up for grabs. Simply shop the Tool Up promotion and enter online for a chance to win. The first prize, a 170 Bar Electric Pressure Washer, is a must-have for both professionals and domestic users. Second prize is a 2-Level Workshop Trolley, a practical addition to any workspace, while the third-place winner will receive a Five-Tread Multipurpose Telescopic Ladder. Winners will be announced on 1 May 2025 via the company’s Facebook and Instagram pages. Jefferson Tools warmly encourages tradespeople across the UK and Ireland to explore the exclusive offers available and enter the competition for a chance to win these prizes. Discover the full range of Tool Up offers by clicking here. For more from Jefferson Tools, click here.

Renewable training provider launches recruitment drive
Renewables training provider, GTEC, is on a mass recruitment drive, looking for 65 trainers to join its rapidly growing team. Following its part acquisition by the United Living Group (ULG), GTEC has expanded at a pace, with centres nationwide, including partnerships with other industry specialists such as City Plumbing, SolarEdge, Weinerberger and Midsummer Energy. Demand for renewables training is growing year on year. 2024 was a record-breaker for heat pumps and battery storage systems in particular, a trend that is only set to continue. GTEC has always been at the forefront of upskilling the installer-base to meet the demands and market potential of a low carbon future, being one of the first centres to specialise in renewable technologies nearly 20 years ago. Now, thanks to ULG's backing, the company is primed to help more engineers take advantage of the business opportunities offered by the transition to net zero, including new subject areas, such as the recently added online Heat Networks introductory course, which is currently fully funded. What GTEC needs to push its plans forward is trainers from the building services and construction sector, with time served experience and recognised qualifications to help fulfil the demand for heat pump, battery storage, solar PV and other mechanical, electrical and civil engineering courses. The ideal role for existing installers looking for new challenges and maybe a break from the tools, successful candidates will help develop and deliver training from GTEC's approved centres nationwide and on-site, supporting businesses, including ULG, in upskilling their teams. Suzanne McNamara, Talent Acquisition Business Partner for ULG, says, "GTEC is at a really exciting point in its history, and is perfectly placed to take the next steps to developing its position as the leader in renewables training in the UK. It is an ambitious, forward thinking and rapidly evolving company looking for new recruits that share its passion for building services and construction, in particular areas of these sectors relating to renewables and sustainability. "If you've got experience in the trades, know how to motivate people and share your knowledge, and you're looking for a career change with plenty of scope for growth, then we'd love to hear from you!" To apply for the job, click here. Could you be a GTEC Technical Trainer? GTEC is looking for Technical Trainers to help develop and deliver high-quality courses in the low carbon and/or construction sectors, including heat pump, battery storage, solar photovoltaic, mechanical and civil engineering qualifications, as well as bespoke training programmes to meet the needs of individual organisations. Suitable candidates will have a background in related construction trades, ideally with experience in low carbon technologies. A proven track record as a technical trainer or mentor would be an advantage, but is not essential. Becoming a GTEC Technical Trainer would also suit tradespeople looking to down tools and pass on their skills and knowledge to others. The role offers a competitive salary and opportunities for career progression, with positions based throughout the UK. For more from GTEC, click here.

Vent-Axia supports implementation date for Awaab’s Law
Vent-Axia has welcomed the UK Government setting a date of October 2025 for Awaab’s Law to be introduced across the social housing sector. The law was initiated following the tragic death of two-year-old Awaab Ishak, due to a mouldy home. Awaab’s Law is part of the Social Housing (Regulation) Act and is set to impose strict requirements on social housing landlords to investigate and resolve issues of damp and mould within specified timeframes, helping residents gain faster repairs and reducing health risks. It marks the biggest change in social housing rules in a decade, aiming to prevent future tragedies and improve tenant safety. In a statement by Deputy Prime Minister Angela Rayner, published on 6 February 2025, it was revealed that from October 2025 social landlords will be required to address damp and mould hazards that present a significant risk of harm to tenants, within fixed timescales. From the same point in time, they will also have to address all emergency repairs, whether they relate to damp and mould or any other hazard, as soon as possible and within no longer than 24 hours. Other hazards, apart from damp and mould will not be introduced until 2026 at the earliest. The Government is set to shortly publish further detail on Awaab’s Law and guidance to support implementation. The statement follows the latest English Housing Survey which recently revealed in 2023 5% of dwellings in England had a problem with damp, higher than in any of the last five years (3-4%). But serious condensation was more prevalent in homes (3%) than rising damp (2%) and penetrating damp (2%). Within the social rented sector, local authority dwellings were more likely to have serious condensation (7%) than housing association dwellings (4%). The data reveals that there is still a significant damp and mould problem in social housing in the UK which needs to be solved. “We welcome the Government setting a date to introduce Awaab’s Law since it gives clarity for social housing landlords. No one should live in a home with mould and damp and landlords have a duty of care to their residents to help ensure they live in a healthy environment. Addressing mould and damp is not only about complying with regulations but crucial for safeguarding residents’ well-being”, says Natasha King, Product Manager at Vent-Axia. “Effective ventilation is vital to improve indoor air quality and tackle condensation and mould. At Vent-Axia we have been advising on ventilation since 1936 and we work with landlords to help them choose the right ventilation for their individual property so they meet their duty of care.” Vent-Axia will be publishing an eBook, Ensuring Safe Housing Conditions: Focusing on Mould and Damp Conditions, to give guidance to social housing landlords on Awaab’s Law and how to tackle condensation and mould.

Precision and power with KNIPEX water pump pliers
KNIPEX's Cobra VDE High-Tech Water Pump Pliers are designed to offer exceptional grip, fine adjustment and VDE certified insulation. Furthermore, with a self-locking mechanism, hardened gripping teeth and a high degree of user comfort, these pliers are built to deliver power and precision for anyone working on electrical installations. The Cobra VDE High-Tech Water Pump Pliers’ design allow users to adjust the pliers with one hand, simply by sliding the lower jaw closed. The spring-loaded hinge bolt locks securely in place so there are no accidental adjustments; just a firm grip on pipes, nuts and fittings. The self-locking jaw geometry means the pliers stay in place without slipping, and users can apply full force without needing to squeeze the handles together. Forged from chrome vanadium electric steel and hardened through a multi-stage process, the Cobra VDE pliers are incredibly durable, KNIPEX tells us. The box-joint design provides high stability while the gripping teeth, hardened to approximately 61 HRC, offer exceptional wear resistance and a lasting bite on both flat, round and angled components. With a maximum grip width of 46mm and the ability to handle pipes up to 2 inches, KNIPEX believes these pliers are ready for any challenge. VDE-tested and rated for use on live parts up to 1000V, the Cobra VDE meets IEC 60900 / DIN EN 60900 standards, making it a safe and reliable choice for electricians. The insulated multi-component grips provide a secure, non-slip hold, reducing hand fatigue and improving control - while the chrome-plated finish means users can expect them to stand up to harsh conditions without rusting. For more from KNIPEX, click here.

HiKOKI Power Tools introduces new cordless nailers
HiKOKI Power Tools has released its most extensive range of cordless nailers to date. With new additions and upgrades to its nailer family across framing, finishing and coil nailers, the line-up delivers power, precision and reliability, without the hassle of cumbersome gas cartridges, hoses or compressors. HiKOKI’s latest cordless nailers are built around its unique air-spring drive system, offering a smooth, pneumatic-like feel with the freedom of cordless operation. The range includes the tough NR1890DCA Clipped Head Framing Nailer, the versatile NV1845DA Coil Nailer, and the NT1865DAA and NT1865DSA Finish Nailers, ideal for precision work. Designed for tough jobs but light enough for all-day use, the NR1890DCA 18V 30° Clipped Head Framing Nailer makes first-fix nailing faster and easier. This second-generation model is 450g lighter than its predecessor and has a reinforced alloy magazine for improved durability, along with a bright LED light so that users can work accurately even in low-light conditions. HiKOKI says that the new nose design ensures a great grip for angled shots, preventing slippage and making skew nailing more precise. With an easy-to-use control panel and a fast driving speed of up to 2.7 nails per second, this nailer can keep up with even the most demanding jobs. A new addition to the HiKOKI range, the NV1845DA Coil Nailer’s high-output energy system delivers the strength needed for a wide range of demanding tasks. It drives up to 45mm nails, while its dust-and-tar-resistant mechanism means it’s reliable even in the harshest environments. It’s also versatile, and can be used for a wide variety of applications from fencing, roofing, siding, window installation and more. For users seeking precision in a lightweight package, the compact NT1865DAA 15Ga and NT1865DSA 16Ga Finish Nailers may well prove ideal. At 400g lighter than the previous models, these tools are comfortable to hold, while their slim nose design - together with a bright LED light - provides visibility for detailed nailing in any lighting condition (with the control panel making any adjustments simple). Whether working on trim, cabinets or delicate woodwork, HiKOKI believes that these tools offer exceptional accuracy and control. The new cordless nailers in the HiKOKI range deliver pneumatic performance with the freedom of cordless and battery-powered operation, meaning no more costly gas cartridges, maintenance-heavy compressors or restrictive air hoses. Features like tool-free depth adjustment, dual firing modes (sequential and contact) and easy-access control panels ensure maximum efficiency on-site. Each model is powered by HiKOKI’s 18V brushless motor technology, so performance is strong and consistent even under heavy use. “We are very proud to present this extensive range of cordless nailers to the industry,” explains Simon Miller, Managing Director of HiKOKI Power Tools UK. “There is little doubt we are redefining expectations in this sector with our engineering and manufacturing knowhow. HiKOKI cordless nailers are bringing more convenience, more efficiency and more value to professional tool users than ever before.” HiKOKI’s latest launch cements its position as the leader in cordless nailing. With this powerhouse range, tradespeople get the speed, strength and precision they need without the bulk and restrictions of traditional pneumatic systems. It’s time to cut the cord and experience nailing without limits. For more from HiKOKI Power Tools, click here.

NICEIC addresses National Apprenticeship Week
As the electrical industry celebrates National Apprenticeship Week (taking place from 10-16 February 2025), new research from NICEIC underscores the vital role of apprenticeships in addressing skills needs and building a strong foundation for future growth. The research has highlighted challenges across the electrotechnical industry surrounding technical skills, recruitment and those starting a career in the industry. Given existing research around the industry’s skills gap, this reinforces the pressing need to build a strong talent pipeline through apprenticeships and training to ensure the industry continues to grow and deliver the necessary transformation of UK infrastructure. The research found over half (52%) of the electrical businesses that had recruited or attempted to recruit technical staff during 2024 found it to be a very difficult process. Moreover, of the firms not currently hiring apprentices, the admin involved (36%), as well as the difficulty of recruiting apprentices (17%), were cited as significant obstacles. This points to concerns that the entire industry should stand ready to address: that the existing infrastructure is not doing enough to reduce labour market friction and connect talent with work. More also needs to be done to encourage fresh talent to enter the industry and support them through apprenticeships into technical roles. Richard Orton, Chief Executive at NICEIC, comments, “Apprenticeships are integral to the electrotechnical industry. They are a key part of the industry’s heritage, how skills and technical knowledge have always been transferred from experienced professionals to new starters, and looking forward, they will be crucial to closing the skills gap. When a business takes on an apprentice, they are not only making an investment in their business and that person’s future, but they are also helping to ensure the industry itself continues to grow. “This new research makes it clear that firms are looking to grow, take on new projects and invest in people, but the industry-wide infrastructure is not always there to facilitate that. There needs to be a collective effort to put better structures in place, that help match electrical businesses with the talent they are clearly looking for. NICEIC is committed to helping the industry in this area and we are actively looking for ways to support NICEIC-certified businesses as they look to take on new apprentices.” Nearly one in three firms surveyed are looking to achieve sustainable growth over the next three years, and of those, nearly half (44%) intend to take on a new apprentice in 2025. This points to a demand among electrical businesses to seize new opportunities and the recognition that one of the best ways to achieve this is by training new staff through apprenticeships. This is further evidenced by the finding that 67% of firms that did hire in 2024 took on at least one apprentice. Satisfaction with apprentices already employed also remains high, with employers giving their apprentices a net positive score of 3.93 out of 5. Although challenges do exist, including concerns about government funding (cited by 49% of firms) and the work-readiness of some apprentices (43%) - underscoring the need for initiatives like the recently introduced T Levels - the overall feedback from employers is encouraging. For those interested in an electrotechnical apprenticeship For those interested in pursuing an electrotechnical apprenticeship, The Electrotechnical Skills Partnership (TESP) has a range of resources on training routes, apprenticeships and careers advice, as well as labour market insights. For current electrotechnical apprentices NICEIC is committed to supporting electrotechnical apprentices’ training and welfare and has partnered with Electrical Industries Charity (EIC) on its free online learning portal, which offers mental health awareness training and resources for apprentices. NICEIC’s Student Membership is available to support and complement the training and personal development of students undertaking technical competency training. It’s applicable for full-time and part-time students, as well as those studying through an apprenticeship within the electrotechnical industry. Benefits include the free NICEIC Pocket Guides app, access to the organisation's customer portal containing free technical information, regular newsletters and bulletins, the Connections magazine on a quarterly basis, and access to The WIRE – NICEIC’s live and on-demand technical webinars. Upcoming webinar available to all A new and upcoming episode of The Wire webinar - New opportunities: the future of electrical training - will be made available to the wider industry as part of NICEIC’s Apprenticeship Week 2025 programme. The episode will take place on 13 February 2025 at 8pm. THE WIRE webinars provide exclusive content to NICEIC-certified businesses and their employees, covering topics ranging from technical explainers to regulatory changes and skills. The upcoming episode will have insights for all looking to future-proof their career or their business, with NICEIC experts discussing the evolving landscape of technical education. During the webinar, the NICEIC training team will explore the different pathways to becoming a qualified electrician, from apprenticeships to T Levels, options for career changers as well as Experienced Worker Assessments (EWAs), and Electrician Plus. With insights on the latest developments in electrical training and qualifications, businesses will be better placed to make the right investment in the skills they need to grow; and those pursuing a career in the industry will be able to make informed decisions about the options available to them. To register, click here. For more from NICEIC, click here.

LEDVANCE to open new UK warehouse
LEDVANCE, a global lighting specialist, has announced the opening of a new warehouse and distribution centre just outside of Birmingham, UK. The centrally located warehouse will provide customers across the UK with swift access to LEDVANCE’s extensive line of intelligent and efficient lighting products for commercial, industrial and residential applications. The vast range of lighting products being stocked at the new warehouse include LED lamps and luminaires, LED strip lighting, smart lighting, and light management systems. Jean-Marc Vogel, CEO Europe West at LEDVANCE, says, “With the UK being the second largest market in Europe, our ambitions are to develop LEDVANCE lighting and renewable business in the UK. A new warehouse will support our portfolio extension and establish LEDVANCE as a lighting market leader, and at the same time increase our market presences and be closer to our customers in the UK.” Nelo Neves, LEDVANCE UK Managing Director, comments, “Until now, our stock was housed and distributed solely from our central warehouse and distribution facility in Molsheim, France, with a lighting portfolio that caters to the whole of Europe. However, the increasing awareness of sustainability and energy-saving technologies has driven the decision for us to establish a local warehouse to help meet customer demand more efficiently and cost-effectively by importing our UK-specific lighting solutions directly to the UK.” Lee Hickling, Logistics and Warehouse Manager at LEDVANCE, adds, “We wanted a UK-based warehouse to streamline our logistics and reduce lead times for deliveries to our wholesale customers across the UK. Any improvement in service levels greatly increases customer satisfaction. Another plus is that our UK warehouse reduces shipping costs and lowers import tariffs, which leads to significant savings in transportation expenses. It also gives us full control of our local stock. All these benefits ultimately accrue to our valued customers in the UK.” For more from LEDVANCE, click here.

Martindale introduces 'general purpose’ 18th Edition tester
For electricians and contractors who need an accurate, reliable and affordable 18th Edition tester, the new ET6000 Multifunction Installation Tester from Martindale Electric may prove the ideal option. Replacing the successful ET4000, the Martindale ET6000 is the latest entry-level model in the company's range and is designed for electricians looking for a basic and reliable installation tester. The ET6000 covers all the essential testing functions required to test to the 18th Edition Wiring Regulations, including fast, reliable high current and non-trip loop testing, auto RCD and ramp test (with all results on one screen), voltage measurement and phase rotation indication. The ET6000 has a full-colour TFT display, which provides clear, easy-to-read results and connection information. The tester also features multiple, context related help screens that guide users through the testing process, displaying easy-to-read test connection diagrams that are colour coded to match the supplied lead set, simplifying the most complex tasks. The ET6000 boasts a high level of input protection with a CAT IV safety rating, ensuring that users are protected when working in challenging environments. The tester is supplied with a full set of high quality 4mm test leads and a Martindale TL207 mains test lead, all contained within the test and go carry bag. Martindale also offers a wide range of additional accessories to enhance the performance of the tester including a rechargeable battery kit, Safebreak socket adaptor and stackable test leads. This ET6000 is engineered for durability and precision, making it an ideal tool for both routine maintenance and for all standard testing to the 18th Edition Wiring Regulations. For more from Martindale Electric, click here.

CEF releases Sustainability & Social Value Impact report
CEF has announced the release of its Sustainability & Social Value (SSV) Impact report. The report provides actionable insights into how the electrical industry can advance in sustainability, while exploring CEF’s journey towards social responsibility within key areas including product development, supply chain management and community partnerships. The report further aims to inspire wider stakeholders as it outlines CEF’s current progress, priorities and future commitments for the coming years. Product development and supply chain management One of CEF’s key missions is to manage and reduce their environmental and ethical impacts across their operations and value chain. As part of this commitment, CEF leverages EcoVadis to assess the sustainability efforts of their supplier partners. In November 2023, 82 of CEF's suppliers were engaged in the programme, growing to 104 suppliers by April 2024. With this momentum, CEF is targeting engagement with 80% of suppliers (by spend) to achieve an EcoVadis rating of their sustainability maturity before the end of the reporting period. In addition to supply chain initiatives, CEF has taken significant steps to reduce its operational carbon footprint by introducing Electric Vehicles (EVs) into its operations. CEF now operates 17 electric vehicles with plans to increase in the coming years. Notably, the mileage covered by EV’s increased by over 400%, demonstrating CEF’s commitment to scaling sustainable transportation solutions. CEF is also taking meaningful action to address the national skills gap, a critical issue given the UK’s shortage of approximately 150,000 qualified installers needed to support the transition to green energy and heating solutions. To tackle this issue, CEF’s technical solution team has developed a training programme focused on upskilling electricians. By equipping professionals to confidently work with sustainable products, the initiative directly supports the UK’s target of achieving net zero emissions by 2040. Community partnerships CEF is committed to supporting local communities and contributing to meaningful change. By collaborating with organisations that share a focus on improving lives, CEF seeks to make a positive impact both within and beyond the electrical industry. As part of this commitment, CEF has partnered with the Electrical Industries Charity (EIC) to help the well-being of individuals in the industry. Recently, the business has funded the development of an online training platform for the EIC, which is designed to benefit the overall well-being of 10,000 apprentices. Alongside this, CEF has committed to raising £1m for Macmillan through national and local funding. Since the partnership launched in 2017, CEF have raised over £800,000 and will continue to progress towards the goal through people-powered fundraising. Additionally, members of CEF are also dedicated to the causes that matter to them and their communities. For example, the CEF Isle of Man branch raised £1,000 for the Forget Me Not charity, which supports people on the Island living with dementia. Team member engagement Health and safety is a top priority for CEF, which established its first Health and Safety Policy in 2003. The policy undergoes an annual review to ensure it remains robust and up to date, while a dedicated Health and Safety Team works to monitor and promote safer working practices across the organisation. In addition, all CEF branches hold bi-annual health and safety meetings, providing team members with a platform to raise concerns and contribute to a safer workplace and further enhancing CEF’s commitment to health and safety. CEF has introduced a new Health and Safety Management system designed to improve accessibility and usability. This system will make it easier for team members to navigate and engage with health and safety processes effectively. CEF’s Director of Sustainability, Connor Dalton, says, “As we strive to be leaders in our sector, we’ve embraced the imperative of sustainability and social value, not just as a business priority but as a moral commitment to people, the planet, and the communities we serve. This report is a testament to collaboration, innovation, and the enduring impact we aim to create. We hope that our full transparency will encourage open dialogue about challenges and opportunities.” The business aims to inspire peers, customers, supplier partners and industry bodies to adopt similar practices, fostering positive change. CEF is dedicated to proving that business growth and environmental responsibility can go hand in hand, setting an industry standard and contributing to a more sustainable future. To read the Sustainability & Social Value Impact Report in full, click here. For more from CEF, click here.